Recently, we waterproofed a shipping container that is being used as part of a waster water treatment system for a large juice manufacturer in Southern California.
Due to the weight of the water the shipping container had to be reinforced with steel cross members. The floor was also reinforced. We then prepped the entire container by using Universal UG in conjunction with the reinforcement cloth on all seams & transitions. We then sprayed Universal IG liquid rubber on the whole surface of the container.
Please bear with us as we move videos to another server. It should be back up soon.
Shipping Container Waterproofing for Waste Water
Used Universal IG where Fiberglassing Previously Failed
In response to customer demand, Rubberizeit!™ has developed our Applicator Trailer System for those applicators wanting to display their services with a rolling billboard. Designed to hold the dual component pump system and plenty of space for prep-tools and materials – this trailer shows the world the many uses of Rubberizeit!™ liquid rubber and displays the services in a very professional “eye-catching” manner.
For more information on becoming a professional Rubberizet™ applicator please Contact Us.
Here we used Rubberizeit! to bring back to life an old rusty water trough. By using Rubberizeit! PG in conjunction with UG – the tank is now repaired and will maintain it’s waterproofing characteristics for many years to come.
Pull-Off Adhesion Strength to Galvanized Steel: 87 PSI
Pull-Off Adhesion Strength to Alloy Steel 1080: 82 PSI
Pull-Off Adhesion Strength to Flash Rust: 127 PSI
Pull-Off Adhesion Strength to Concrete: 100 PSI
Rusty Water Tank Repair
Repair & Repurpose with Rubberizeit! Liquid Rubber
A big THANK YOU to Todd D. from Fort Collins Colorado for providing us with the below photos of his swamp cooler pan repair with Rubberizeit!™ PG, UG & Reinforceit!™ Cloth.
Depending on the condition of your cooler, it’s really a simple process.
Knock off surface rust with a wire brush
Remove / vacuum any loose debris
Apply primer coat of PG
Fix holes with Reinforceit!™ cloth in combination with rubber
2-3 additional generous coats of Rubberizeit!™ UG
Let cure & you’re finished.
Rubberizeit!™ is designed to be directly applied to rusty metal – and has an adhesion pull of strength of of 127PSI to flash rust. In addition, when applied at 60mil thickness (typically 3 generous coats of UG), because of it’s self healing characteristics – it doesn’t pin-hole like polyurethane type products do. What does this mean? ::: when a coating pin-holes it starts to allow oxygen and H2O to gain access to the metal beneath and restarts the corrosion process – this isn’t seen until much later when the coating starts bubbling from the rust beneath.
In addition, Rubberizeit!™ is a single part water-based liquid rubber that has hardly any fumes – it’s safe & simple to use!
Rusty Swamp Cooler Pan
Rusty Holes in Swamp Cooler Pan
Another Hole in a Rusted Swamp Cooler Pan
And MORE Holes in this Swamp Cooer Pan!
Coated Swamp Cooler Pan
Rubber Coated Swamp Cooler Pan
Reinforceit! Cloth for the Repair of Holes
Filled Swamp Cooler Pan
Filled Evaporative Cooler Pan
Pictures & Video of Swamp Cooler Pan Repair
Many thanks to our customers for providing the photos!
Below is a short video showing a few pictures of how one of our customers repaired their leaky Torchmate CNC Table. Because Rubberizeit! Liquid Rubber is suitable in applications where it contains Sodium Nitrite in saturated form and it adheres well to metal – it’s the perfect solution for leaky CNC tables.
Leaky Torchmate CNC Table Repair with Rubberizeit! Liquid Rubber
Rubberizeit! Liquid Rubber - it's like Duct Tape in Bucket
See our page on repairing Leaky Torchmate CNC Tables HERE for application suggestions and tips & tricks.
For Immediate Release: February 9th, 2012
Hood River, Oregon
Dual Component Pressure Pot Applicator
In response to customer demands; Rubberizeit!™ has released the newest addition to the Liquid Rubber family of products – the Dual Component Pressure Pot Application System. Keeping in line with the core value of Making Waterproofing Affordable – the new dual component system gives property managers, agriculture maintenance and small “repair focused” contractors a lower cost point Liquid Rubber IG application system. In the past, the only way to “spray” apply Liquid Rubber IG was with the dual component pump system – which costs significantly more.
Rubberizeit!™ Liquid Rubber comes in two grades: IG & UG – both grades can be roller or brush applied. However, only the IG can be applied with either the pump or pressure pot system. By applying Liquid Rubber IG with either dual component system – drying & cure times are significantly reduced and the rubber membrane is “tack” dry within 30 seconds of application. It is also easier to maintain a consistent thickness during the application process.
The Dual Component Pressure Pot System consists of two pressure pots; one is large enough for a full five gallon bucket of Liquid Rubber IG, while the other holds the Accelerateit!™ catalyst. Both materials are eco-friendly, contain zero VOC’s and are non-toxic. In addition, the Liquid Rubber IG is UV Stable (tested to maintain it’s characteristics for up to 25 years) and suitable as a pond / water-feature liner.
For more information please call (855) 782-2374 or email info@Ruberizeit.com.
The Rental DCPP Liquid Rubber Application System
How the DCPP Arrives
Rental DCPP - Wheel
Rental DCPP - Front Wheels
Rental DCPP - Wand Back Top View
Rental DCPP - Wand Side View
Rental DCPP Wand Front Top
Rental DCPP - Wand Front View
Rental DCPP - Open View
Rental DCPP - Fully Connected
Rental DCPP - Application Hoses
Rentall DCPP - Rubber Side Pressure Gauge
Rental DCPP - Fully Connected with Wand
Rental DCPP - Box Open
Rental DCPP - Mesh Strainer
Rental DCPP - Handle
Rental DCPP - Fully Connected
Rental DCPP - How it Arrives
Rental DCPP - Front Side
Rental DCPP Both Pots & Connection Hose
DCPP Rubber Side
DCPP Catalyst Pressure Gauge
DCPP Non-Toxic Catalyst Side
DCPP Open
Large Pot for Rubberizeit! Type IG
How the DCPP Arrives
Rent or Purchase the DCPP Rubber Application System
Spraying Liquid Rubber with the DCPP Application System
Until recently we haven’t been recommending our Rubberizeit! for water-proofing plywood aquariums. You see, Liquid Rubber doesn’t adhere well to glass or silicone. We feel this is because the non-porous nature of the two materials does not allow the water to properly evaporate out of the material. While resin, fiberglass, concrete, wood and other substrates Rubberizeit!™ creates an extremely strong bond – this is due to their porous (no matter how small).
Well, we’re happy to let you know – the problem has now been solved and the pictures with-in the below video help detail how to seal around the viewing pane to make sure it is both secure and water-tight.
Please bear with us as we move videos to another server. It should be back up soon.
Thank you to Noel from Guam for the pictures used in the video
Applying Liquid Rubber in Conjunction with Reinforcement Cloth
Here is another awesome build from John F. (AKA “THE BOSS” on MFK) in Colorado – Personally – we believe that John should be out selling these to car dealers & mechanics!
Showing how Rubberizeit! Liquid Rubber can be used to repair a leaky roof vent or used to install a new one. Because it is UV Stable, it is suitable for applications subject to direct sunlight. Tested to 25 years before material starts to deteriorate.
Simple Pond Repair With Rubberizeit!™ Liquid Rubber™
Showing another example of the many uses for Rubberizeit!™. A liquid rubber product that is so versatile every handyman, farmer and maintenance man should have a bucket in their shop.
